Protective: The surge protector can effectively protect your devices from electrical hazards, voltages, and other potential damage caused by overheating.
Nice quality: The surge protector is made of high-quality abs material, which has good heat dissipation performance and can be used for a long time.
Easy to install: The surge protector is easy to install, just peel off the protective film on the back of the device and stick it on the wall.
| Model | SPD2 | |
| Standard | IEC EN50539-11; GB18802.11 | |
| Protection Grade | T2, Class II | |
| Max Continuous Working Voltage Uc | AC275V/AC385V | |
| Nominal Discharge Current In 8/20μs | 20KA | 30KA |
| Max Discharge Current In 8/20μs | 40KA | 60KA |
| Lightning Impulse Current 10/350μs | 12.5KA | |
| Voltage Protection Level Up | 2.2KV-4KV | |
| Number of Poles | 2P / 3P / 4P | |
| Response Time Ta | ≤25ns | |
| Connecting Cable | ≥4mm², Ground Wire ≥6mm² | |
| Method of Installation | 35mm DIN Rail | |
| Matched Fuse or Circuit Breaker | ≥32A | |
| Operating Temperature Range | -40°C ~ +80°C | |
| Housing Color Module/Base | Grey/White | |
| Protection Class | IP20 | |
| Tightening Torque | 3.0N.m | |
| Terminal Connection Type | Phillips Screws | |
| Certificate | CE, ISO9001-2015 | |
| Working Status Indicator Window | Green (working well), Red (malfunction, product or module must be replaced) | |
Tel：+0086-15669851253
WhatsApp：+86-15858579010
WhatsApp：+86-15669851253
WeChat：sales15669851253
Email：Sales@dihool.net
Smart Home
